Jump to content
Sign in to follow this  
Guest genoki

Versie NoOneManIt

Recommended Posts

Guest genoki

De ultieme dvb2000 versie;

 

*************************************************

* *

* DVB2000 - 1.82.0v *

* modified by *

* *

* NoOneManIt *

* *

* Ver. 20010909 *

* (1.0) *

* *

*************************************************

 

ATTENTION: To watch channels Pay TV without subscription is illegal. The author declines every responsability deriving from illicit uses of this program. Moreover, for how much it has been made every effort in order to produce a free software from errors, the author declines every and any responsability deriving however from the use of the same program, is for the part from modified he, is to greater reason for the remained original and realized part from Uli or others.

 

o) PREMISED

===========

In the first place I wish to thanks Uli for the incredible job carried out in the realization of the original DVB2000. Every modification brought to the null program wants to remove to god of the product the original. The modifications have been carried out to the single scope of study; in practical I have intentional to only put in action all understood how much of the Dvb standard to the single aims of fun. I moreover wish to thanks all how many the friends who have contributed, with their courtesy, to increase my acquaintances on the world of the Sat TV, and in particular Amon for its realization on the CAM of 9200/9500 NOKIA and Kreator for the given initial cue with its modified version of the DVB2000. This my modified version wants to only be a modest " attended interval " in of sure the better release that Kreator will make.

 

o) CHOICE OF THE VERSION

========================

I have preferred to modify this version (1.82.0v of Sandra) rather than recent others because the modifications of Sandra are how much of best have been never made in terms of logging the Dvb and all the talks between decoder and CAM. Who only was interested to see the TV can see to successive versions if not quite to pass to the original program of the Nokia. This firmware instead is particularly adapted who wishes, beyond to the mere vision of shows, deepening its acquaintance of the Dvb, the decoder and the CAM, with all the aspects correlated they.

 

o)REASONS OF THE MODIFICATION

=============================

Substantially I have intentional to realize to firmware that it answered to following requirement:

1) Automatic processing of PID ECM;

2) However manual participations;

3) Nobody needing of settings particular, in such way that who as me it uses its personal settings, and not simply those taken from Internet, were not forced to drive crazy to every they modernization;

4) Nobody needing of particular COCO like answers of the smart-card;

5) Activation of the particular CAM Aston 1.03 with provider Stream type;

6) Visualization of every detail contained in the PMT.

 

o) REQUIREMENT

==============

Premised that however this firmware, disabling all the particular functions, work exactly as the original is on Nokia 9200/9500 that on the 9600, however particular extension " robustness " on the 9200/9500. This because routines of Uli of the this version for the CAM Common Interface is enough simple. Firmware is be from tested me is on a Nokia 9500 with CAM of Amon ver. 2.1, is on Nokia 9600 with CAM Irdeto type FreeCam 2.017 and CAM Aston 1,03. In all the cases it is succeeded to obtain the full functionality of all the options, but with the 9600 troubles which had to said how much can be noticed sometimes already. After all, in case of I use with 9600, council to use or Aston 1.03 for using also with Stream, or above all the activated FreeCam with in my firmware the option of AutoSwitch.

 

o) INSTRUCTIONS

===============

Once activated the main menu, in which I have supplied to render visible all thus the possible options (as I have made also in the menu expert), is approached the new menu " NoOneMan " with key " C here " (i will use the notation of the keys used from Uli). Here the detail of the several functionalities.

 

0 - PMT ECM PID Scan

If the selection in automatic rifle of the PID of the ECM had turned out wrong, you can use this menu; you obtain the directory of all the systems of codifies itself contained in the PMT with relative PID ECM and, in case of codifies SECA, also the relative IDENT. Selecting one activate that one like PID of the ECM.

 

1 - 1x CAM ResetInit

2 - 2x CAM ResetInit

3 - 3x CAM ResetInit

1 or 2 or 3 reset of the CAM with successive INIT of the same one will be carried out. Particularly useful for use it of the decoder with some known types of smart-card

 

CA system ID

It comes visualized the type of codifies current marked from the smart-card during the last one reset.

 

4 - ECM PID

If also with function 0 the intentional result were not obtained, you can use this function for manually set the just PID of the ECM.

 

5 - Last PMT

Is be repeated here for commodity the possibility to visualize the last received PMT of the channel in vision.

 

6 - Autoswitch

Is possible to set up from the order of preference in I use here of the several codifies, independently from how much envoy from the smart-card at the moment of its insertion. As an example, if we activate V-I-S (that it means 1° Viaccess, 2° Irdeto and 3° SECA), going on a channel first firmware look if in the PMT exists a PID ECM for the Viaccess, and if this finds the CAM use it. If it in the second place does not find the Viaccess try with the Irdeto. If finally also thus the search fails, then try with the SECA. The first PID of the ECM that will be found following this order, will be that one used from the CAM.

 

7 -SECA reorder

Is useful for those provider SECA that they use to send in the PMT more relative PID to various IDENT, of which some quite they are bogus. With this option activated, the program, before choosing the PID of the ECM, will carry out reorders of those SECA in such way to put to the first places those just ones, and to move instead in bottom those bogus.

 

8 -CAM

The type of CAM must be set up that we have. Obviously if decoder is 9200/9500 will be possible one not to set up nothing of various from " Embedded ", while for the 9600 you must to be set up the type of present CAM Common Interface. Is particularly important as an example to choose that just one in the cases of Aston 1.03 (for the visualization of Stream) and FreeCam.

 

9 -View SECA PBM

If in the present PMT is one or more SECA codifies, you can view for each the date, codified and decodified, and the PBM.

 

A -Next Menu'

From it is passed to the successive menu here that at the moment is nearly all disabilied. ; -) I have suspended the realization of the visualization of the EPG of D+ because they have begun to send the EPG also as the Dvb standard.

 

o) SUGGESTIONS

==============

After all the better operation (to part the case of Aston 1.03) is obtained with CAM of type Embedded (9200/9500) or FreeCam (9600), SECA reorder ON and Autoswitch V-I-S. With these parameters I have always obtained to pass from a channel to the other without some problem independently from the type of codifies used. This will be possible agrees above all that if they will be used settings in which is put to ON it is AutoPMT that AutoPID. In these conditions you will not be some necessity for not adopting a position PID PMC for the ECM.

 

o) COPYRIGHT

============

The program, obviously for the single part of my modifications, can to be free copied, distributed, modified and other, provided that always comes cited the author, than however it maintains the right of property. To the contrary this program can NEVER NOT TO BE USED To FINE OF PROFIT, LUCRO AND/OR HOWEVER COMMERCIAL.

 

o) COMPENSATION

===============

Obviously I do not want and not I waited for me some type of compensation. However i will appreciate what if someone, satisfied from its I use, will send any type of data of official subscriptions (HMK, PPUA, IRDETO, SECA, VIACCESS..). This to the aim... ALSO (:-D) to implement the successive developments that I have in mind and for which i will need of testing the effective functionality with all the types of codifies.

 

o) TO CONTACT THE AUTHOR

========================

Although he is wide available to listen to every type of critic (positive), suggestions, comments etc., however are at the moment engaged enough for being able to guarantee to anyone answers. Normally the only forum that I attend with a minimum of regularity, but truly minimal, is that one of MadeInMalta, section DVB., even if also posting insistently even sometimes you will therefore not see answers, not angry witn me, indeed I now ask you excuse but evidently will to say that other engagements me will have rendered impossible. However in case of doubts or questions, the suggestion is always that one: listened, tried, you read instead asking endured, because generally thing that ta being attempted is nearly always be said. And thus making moreover is sure to always catch up levels of greater acquaintance, rather than to wait all " always ready ".

 

Good vision, but above all... good fun!

NoOneManIt - ©2001

 

Automatic translation by Altavista

 

gr genoki

Share this post


Link to post
Guest Ghost

@ genoki,

 

Bedankt voor de tip!

Dit is inderdaad een KLASSE soft!!!

 

Getest op 9500 met Amon 4.0(zonder timer)

De soft zet Alles open en is erg snel.

 

Geen aanpassing van het kaart nummer meer nodig.

 

gr Ghost.

Share this post


Link to post
Tech

En waar staat die?


Aan de rand van de afgrond is een stap voorwaarts niet altijd vooruitgang

Share this post


Link to post
Guest Happy2000

Bij de polen staat hij dvbnom2001-09-09.zip heet de file

Share this post


Link to post
Guest bangkok

wel de settings aanpassen van de soft of je kan geen settings uploaden en de afstandbediening werkt niet naar behoren.

gr bangkok

Share this post


Link to post
Guest Happy2000

Hallo test 123 ja hij doet het, gaat ie.

 

Als ik bij Taquilla zender gaat zoeken lukt dit niet geen beeld, bij de andere zenders gaat dit wel goed.

Hebben meer mensen hier last van ????

 

Greetz

Share this post


Link to post
Guest Satslope

Probeer menu, C, 0 en dan het nummer wat voor 000C staat.

 

Ook kun je de autoswitch volgorde op S-I-V zetten bijv.

 

Er is trouwens een update van deze soft die ook de viaccess providers aangeeft, in het archief van 4-11-2001

Share this post


Link to post
Guest scooby doei

Happy 2000

 

Ik kan dit bij de Polen niet vinden.

Mail mij de URL even.

 

Bedankt,Scooby Doei

Share this post


Link to post
Black Tiger

Scooby, check even de bedelstaf, want deze vraag had je al hier naartoe verplaatst en ik had hem gemoved naar daar omdat daar de plaats is om illegale links te vragen.:)

In elk geval is je vraag nu bekend, dus heb je sneller kans op reply's.


Greetings, Black Tiger

Share this post


Link to post
Guest Happy2000

Ja hij doet het Satslope, 7 stond niet aan en nu werkt het perfect heb trouwens de nieuwe versie erin gezet.

 

 

Greetz

Share this post


Link to post
Guest Satlook

Weet iemand trouwens hoe ik de ecm pid kan vastleggen?

Hij springt ieder keer weer terug in de oude waarde.

Share this post


Link to post
Guest Satslope

Vastleggen kun je via het PID menu (Menu, 7) en dan op A (channel) en dan replace kiezen.

 

Het is dan nog steeds mogelijk dat hij "terugspringt" en dat komt omdat hij de eerst bruikbare stream pakt als je hem op autoswitching hebt staan. Wil je per se een bepaalde pid, dan zet je die op OFF of evt op een andere volgorde (werkt soms ook).

Share this post


Link to post
Guest hce_nl

Wat ook leuk is, is dat je met een 9600 en een Aston 1.03 gewoon naar Stream kan kijken :)

 

Moet je via GUIDE -> i -> 8 wel even "Aston 1-1.03" selecteren.

 

Het werkt bij mij perfect, klasse software!!

Share this post


Link to post
Guest hce_nl

Kan iemand mij de link naar "de Polen" PM'en?

Share this post


Link to post
Guest scooby doei

Deze software vandaag erin gezet en het werkt perfect. Bedankt Genoki.

 

Scooby Doei

Share this post


Link to post
Sign in to follow this  




  • Hosting Fun

×
×
  • Create New...

Important Information

By clicking the accept button you specifically agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. If you don't agree, please leave this site.