T
thai-demon
upc direct is al een tijdje open met de penta V3 kaart
ja je kan deze P-V3 kaart programeren zodat deze geschikt is voor conax based cams of cryptoworks based cam,s
upc-direct op astra en cryptroworks op 28,2 East lukt ermee..
werkt met deze module,s :
Dragon cryptoworks versie erop doen
conanx3.03 conax versie erop doen
mr1170 / 1171 cryptoworks versie erop doen
cryptoworks cam cryptoworks versie erop doen
jokercam cryptoworks versie erop doen
xcam ? weet ik nog niet
===programming no.1 ==
met een conax cam:
Download TJ's PenTaLoader.
Download file voor Conax cams
klik "load bin" dan laad de bin file : "PenTa3_CW_Loader" dan klik : "program"
wait for it to finish then ....
druk "load bin" dan laad de bin file : "PenTa3_CW_Upc_14_09_2004" dan klik program.
dan in de canox cam doen en and sit back and watch movies or footie...
For Cryptoworks cam:
Download TJ's PenTaLoader.
Download the file for Cryptoworks cams.
press "load bin" then load the bin file named "Penta3_All_C_W_Loader" then pess "program"
wait for it to finish then ....
press "load bin" then load the bin file named "PenTa3_CW_Upc_14_09_2004" then press program.
then put it in ya cam and sit back and watch the footie on sportTV
===========programming no.2 ============
via dynamite programmer of cas2 met add-on ..
============================
filez weet ik ook te vinden bij rdi sectie other card files.
Ben alleen dus nog op zoek naar een adres in nederland waar ik deze kan kopen een beetje geschikt..
iemand ervaring hiermee ??
ja je kan deze P-V3 kaart programeren zodat deze geschikt is voor conax based cams of cryptoworks based cam,s
upc-direct op astra en cryptroworks op 28,2 East lukt ermee..
werkt met deze module,s :
Dragon cryptoworks versie erop doen
conanx3.03 conax versie erop doen
mr1170 / 1171 cryptoworks versie erop doen
cryptoworks cam cryptoworks versie erop doen
jokercam cryptoworks versie erop doen
xcam ? weet ik nog niet
===programming no.1 ==
met een conax cam:
Download TJ's PenTaLoader.
Download file voor Conax cams
klik "load bin" dan laad de bin file : "PenTa3_CW_Loader" dan klik : "program"
wait for it to finish then ....
druk "load bin" dan laad de bin file : "PenTa3_CW_Upc_14_09_2004" dan klik program.
dan in de canox cam doen en and sit back and watch movies or footie...
For Cryptoworks cam:
Download TJ's PenTaLoader.
Download the file for Cryptoworks cams.
press "load bin" then load the bin file named "Penta3_All_C_W_Loader" then pess "program"
wait for it to finish then ....
press "load bin" then load the bin file named "PenTa3_CW_Upc_14_09_2004" then press program.
then put it in ya cam and sit back and watch the footie on sportTV
===========programming no.2 ============
via dynamite programmer of cas2 met add-on ..
============================
filez weet ik ook te vinden bij rdi sectie other card files.
Ben alleen dus nog op zoek naar een adres in nederland waar ik deze kan kopen een beetje geschikt..
iemand ervaring hiermee ??