9602

[Satlook]

Mischien een domme vraag maar ik heb het toch goed dat in een MM 9602 ook die geweldige software past?

Zijn er trouwens nog meer verschillen dan het ontbreken van de

SCSI aansluiting?

Ik zoek ook nog even de serie nummers van de tuner blikken(ik ben ze kwijt.

 

[Black Tiger]

Voor zover mij bekend geen verdere verschillen, of het zou al tunerblik moeten zijn of zo.

Je kunt er dus ook een bootloader en die fantastische overflow versie in stoppen.

 

[batyko]

is dit wat je kwijt bent?THE NOKIA TUNER

A cautionary note: Newer versions of some Nokia receivers have tuners whose autosearch capabilities are not fully functional - they will not automatically obtain the symbol rate for a transmission if it is not provided in the Network Information Table. This is not good news if you want to search for feeds! Channels will still be received ok if the parameters are known and entered exactly. If your 9600 came with v2.4 software or higher from new, you may be affected. Users of these receivers report that the auto option for SR in the advanced search menu of the Nokia software is disabled from new.

If the tuner contains the following lettering: DF1ST1173 Art. No: 55-50075-01, then it is a non-autosearch type. If it is marked NDT1006A and Art. No. 567009002 revB or similar, then it is OK. This can be determined without opening the box (thanks Lou and Stephan) - the tuner numbering is on a white label on the tuner can and is visible through the grille on the top of the receiver - it is the small metal box immediately behind the lnb input to the receiver. Please note the safety warning under 'Changing the Bootloader' below if you do remove the cover from the box - components inside can be at mains voltage even in standby!

of kijk even op deze link:

http://www.netcomuk.co.uk/~jrainer/9600/9600.html

Have fun.

 

[batyko]

is dit wat je kwijt bent?THE NOKIA TUNER

A cautionary note: Newer versions of some Nokia receivers have tuners whose autosearch capabilities are not fully functional - they will not automatically obtain the symbol rate for a transmission if it is not provided in the Network Information Table. This is not good news if you want to search for feeds! Channels will still be received ok if the parameters are known and entered exactly. If your 9600 came with v2.4 software or higher from new, you may be affected. Users of these receivers report that the auto option for SR in the advanced search menu of the Nokia software is disabled from new.

If the tuner contains the following lettering: DF1ST1173 Art. No: 55-50075-01, then it is a non-autosearch type. If it is marked NDT1006A and Art. No. 567009002 revB or similar, then it is OK. This can be determined without opening the box (thanks Lou and Stephan) - the tuner numbering is on a white label on the tuner can and is visible through the grille on the top of the receiver - it is the small metal box immediately behind the lnb input to the receiver. Please note the safety warning under 'Changing the Bootloader' below if you do remove the cover from the box - components inside can be at mains voltage even in standby!

of kijk even op deze link:

http://www.netcomuk.co.uk/~jrainer/9600/9600.html

Have fun.

 

[Satlook]

Oke bedankt.

Inderdaad dat was ik kwijt @batyko.

Ik had die link dus ook. Maar een keer format C gedaan en toen kwijt geraakt.