Newcs/CCcam probleem

[eendenteam]

We hebben inmiddels newcs aan het draaien gekregen op de QNAP NAS. We willen met de dm8000 en cccam connecten naar newcs (username en paswoord: dummy). Newcs draait, en cccam connect. We gebruiken een smargo met een geactiveerde canal digitaal kaart. De smargo en kaart worden herkend.

We zien dit van newcs:

This is NewCS 1.67 RC1 [Build: 95] - the New CardServer by the Butter-team..
[ 13:09:59 ] [ NewCS ] Ready to GO!
[/etc] # [ 14:10:12 ] [ Newcamd:13000 ] User dummy logged in, client: CCcam
[ 13:10:30 ] [ Newcamd:13000 ] User dummy logout
[ 13:10:30 ] [ Newcamd:13000 ] User dummy logged in, client: CCcam
[ 13:10:45 ] [ Newcamd:13000 ] User dummy logout
.
.
.
login, logout, enz

De vraag is waarom de dm8000 (user: dummy) niet ingelogd blijft.

 

[eendenteam]

opgelost nadat we op de QNAP NAS dit commando uit hebben laten voeren:

echo 2 > /proc/cpu/alignment

Deze regel hebben we i.i.g. toegevoegd aan autorun.sh op de QNAP NAS.

 

[eendenteam]

Alles lijkt nu goed te gaan; echter er worden geen kaartdata gestuurd:

This is NewCS 1.67 RC1 [Build: 95] - the New CardServer by the Butter-team..
Compiled on Jul 14 2009 at 12:00:33
Reading Config file from /etc/newcs.xml
TCP-log password is enabled, set to: NewCSpwd
level: normal
type: init
output: console,tcp
logger config: level 1 type 3 output 5
Console log options: level 1 type 3
TCP log options: level 1 type 3
[ 17:25:33 ] [ Box detect ] Box type 13 (Qnap NAS)
[ 17:25:33 ] [ Config ] Pincode for device 0 (phoenix): 0000
[ 17:25:33 ] [ Config ] /dev/usb/ttyUSB0 ECM priority: round
[ 17:25:33 ] [ EMM Cache ] Initialising dynamic Cache
[ 17:25:33 ] [ ECM Cache ] Initialising dynamic Cache
[ NewCS ] Process ID is: 2749
[ 17:25:33 ] [ Loader ] Reader type 2 on node /dev/usb/ttyUSB0
[ 17:25:33 ] [ Phoenix ] Opening device /dev/usb/ttyUSB0
[ 17:25:33 ] [ Phoenix ] Setting Parity to: EVEN
[ 17:25:33 ] [ Phoenix ] Setting 2 Stop bits on node /dev/usb/ttyUSB0
[ 17:25:33 ] [ Phoenix ] Setting Baud to custom 16129
[ 17:25:33 ] [ Phoenix ] Normal RESET on node /dev/usb/ttyUSB0
[ 17:25:35 ] [ ATR ] T=0 1etu=62.00us Guardtime:13etu WWT:144000etu
[ 17:25:35 ] [ ATR ] Historical bytes: p p [0A] [0E] l [B6] [D6]
[ 17:25:35 ] [ Loader ] Init Seca card
[ 17:25:35 ] [ Phoenix ] Setting Parity to: EVEN
[ 17:25:35 ] [ Phoenix ] Setting 2 Stop bits on node /dev/usb/ttyUSB0
[ 17:25:35 ] [ Phoenix ] Setting Baud to custom 16129
[ 17:25:35 ] [ KeymaN ] Adding key xxxxxxxxxxxxx type 0 on Provider 000000 for caid 0100 ID=0
[ 17:25:35 ] [ KeymaN ] Adding key xxxxxxxxxxxxx type 1 on Provider 000000 for caid 0100 ID=0
[ 17:25:35 ] [ KeymaN ] Adding key xxxxxxxxxxxxx type 1 on Provider 00006A for caid 0100 ID=1
[ 17:25:35 ] [ Loader ] Card 0100 on port /dev/usb/ttyUSB0 ready
[ 17:25:35 ] [ Loader ] Starting Newcamd Server on port 13000
[ 17:25:35 ] [ NewCS ] Ready to GO!
[~] # [ 17:25:35 ] [ Newcamd ] Newcamd thread Server started on port 13000
newcamd: main loop
[ 17:25:39 ] [ Newcamd:13000 ] User dummy logged in, client: CCcam

We hebben <autosid>op Yes gehad en ook op No, terwijl we in het laatste geval de <id> van de zenders hebben toegevoegd.

Wie heeft een idee waar dat aan kan liggen temeer daar de cardserver is opgestart en de user ingelogd is?

 

[Guardian]

<name>local</name>
<password>local</password>
<hostname>localhost</hostname>
<allow>/dev/ttyUSB0</allow>
<au>on</au>
<sidoverride>off</sidoverride>
<spider>No</spider>