Irseto9b

T

theGIZMO

De nieuwste van Alfredo:

IRSETO9a for the HUMAX 5400 internal CAM and the HumFree Patch 2.4 and up.

10 SECA Providers + 1 Irdeto autoupdate + 4 normal Irdeto Providers

IRDETO/BetaCrypt

supported commands:

01 01 .. .. - Keyupdate

01 01 .. .. - ChannelID Update and Kill

01 05 .. .. - ...

01 02 00 .. .. - Cards Serial Number in ASCII)

01 02 01 .. .. - Cards Serial Number in HEX)

01 02 02 .. .. - Get Cards Country Code)

01 02 03 .. .. - Get Provider ID XX)

01 02 08 .. .. - Readout Receiver Buffer

01 02 09 .. .. - CAM Key xx = which key to use

01 02 0A .. .. - PIN Abfrage der D-Box - Danke an Dr. Mabuse!

01 02 0E .. .. - Read Card File X

01 02 11 .. .. - Answers with 40 Bytes

full autoupdate of the following items:

10 09 -> singlekey update, up to 4 nanos in one ECM string = max 4 Keys at once

10 52 -> doublekey update, up to 2 nanos in one ECM string = max 4 Keys at once

10 E4 -> quadruple update = max 4 Keys at once

11 06|

51 06|

91 06 -> channel ID update and kill - only tested on german PW

all above nanos are anded with 0x3F. So all other variants of these command are also handled.

68 0D|

28 0D -> PMK update includig a new provider ID

CB 20 -> complete CB20 Matrix calculation

SECA

only the CWs are decoded. Autoupdate is impossible in the internal IRDETO CAM.

--------------

This Soft is intended for the 16F628 PIC with a 24C64 EEPROM!!

The 16F628 and 24C64 are pincompatable with the older 16F84 and 24C16 parts. So it is very easy to upgrade your existing DIL or SMD cards...

Alfredo

August 2001

Remember, in version 2.4 of the HumFree Patch, a autoupdate is only possible for the CA-ID which is following the 4711 in the CoCo string. If you wish to have a autoupdate for CA-ID 1702, then the CoCo string should have this format: 47 11 17 02 01 00 00 00. For a autoupdate with CA-ID 0602, it looks like this: 47 11 06 02 01 00 00 00. The Auto-CA-ID is taken out of the CoCostring, so that the normal CA-ID for the non-autoupdate Provider is no longer used.

Example:

CA-ID = 47 11 06 02 01 00 00 00

The "Auto" Provider is used for 06 02 with the Data filled in the common aeria. Die normal place for the 0602 Keys is not used in this case.

 
Maar waarom geen DS9-401lite files in de combinatie 16f628 en 24c64 proggen? Dat heeft toch meer dan deze alfredo files. Ik vind het toch jammer dat dit niet kan met de gewone goldkaartjes. Dat vond ik juist de kracht van die alfredo files. Als je toch al moet gaan switchen met ic's of eproms, dan kun je toch ook net zo goed overgaan op de echte Ds9-16f876-24c64 combinatie. (Ok, ik snap wel dat dit dan op een andere kaart moet, maar toch...)

 
Volledig mee akkoord MarcieMarc,

dan kan SCT en Sexview er ook in 1 keer op;)

 
@MarcieMarc,

Je hoeft dus alleen een nieuwe 16f628 te kopen, want de lite-file is geschikt voor de 24c16, alleen als je in 't bezit bent van nog een oud DIL-kaartje. Alfredo past op de good-old 16f84/24c16 kaartjes en dat verzekerd je weer ervan dat iets goed werkt, dus niet dat gehannes van die kaart wel en die kaart niet (wafer.....com) als je begrijpt wat ik bedoel.

MarcieMarc, kzie je snel!

Grtz Mike The Bike

 
Ik dacht dat de DS9-401lite ook werkte op de 'good old' DIL met 16f84 en 24c16 (mits vervangen van pic natuurlijk)

Voor de speciale humax versie van de 502 heb je wel een nieuw kaartje nodig... (876)

Grtz,

Wimpie

 
Volgens mij ondersteund ds9lite 401 geen gca

tenminste, mijn 'lite' kaartje werkt niet meer sinds gca zijn intrede heeft gedaan.

Heb nu wel via satlounge ds9lite 402 gekregen, maar deze nog niet aan de praat.

Maargoed, de 16f876+24lc64 zijn besteld, nu alleen nog even wat tijd om kaartje te etsen en ic's erop te solderen... als de tijd (blijft) ontbreken bestel ik binnenkort wel een compleet kaartje

;-)

Groet,

C4

 



Hosting Fun

Advertenties

Terug
Bovenaan Onderaan