T
theGIZMO
De nieuwste van Alfredo:
IRSETO9a for the HUMAX 5400 internal CAM and the HumFree Patch 2.4 and up.
10 SECA Providers + 1 Irdeto autoupdate + 4 normal Irdeto Providers
IRDETO/BetaCrypt
supported commands:
01 01 .. .. - Keyupdate
01 01 .. .. - ChannelID Update and Kill
01 05 .. .. - ...
01 02 00 .. .. - Cards Serial Number in ASCII)
01 02 01 .. .. - Cards Serial Number in HEX)
01 02 02 .. .. - Get Cards Country Code)
01 02 03 .. .. - Get Provider ID XX)
01 02 08 .. .. - Readout Receiver Buffer
01 02 09 .. .. - CAM Key xx = which key to use
01 02 0A .. .. - PIN Abfrage der D-Box - Danke an Dr. Mabuse!
01 02 0E .. .. - Read Card File X
01 02 11 .. .. - Answers with 40 Bytes
full autoupdate of the following items:
10 09 -> singlekey update, up to 4 nanos in one ECM string = max 4 Keys at once
10 52 -> doublekey update, up to 2 nanos in one ECM string = max 4 Keys at once
10 E4 -> quadruple update = max 4 Keys at once
11 06|
51 06|
91 06 -> channel ID update and kill - only tested on german PW
all above nanos are anded with 0x3F. So all other variants of these command are also handled.
68 0D|
28 0D -> PMK update includig a new provider ID
CB 20 -> complete CB20 Matrix calculation
SECA
only the CWs are decoded. Autoupdate is impossible in the internal IRDETO CAM.
--------------
This Soft is intended for the 16F628 PIC with a 24C64 EEPROM!!
The 16F628 and 24C64 are pincompatable with the older 16F84 and 24C16 parts. So it is very easy to upgrade your existing DIL or SMD cards...
Alfredo
August 2001
Remember, in version 2.4 of the HumFree Patch, a autoupdate is only possible for the CA-ID which is following the 4711 in the CoCo string. If you wish to have a autoupdate for CA-ID 1702, then the CoCo string should have this format: 47 11 17 02 01 00 00 00. For a autoupdate with CA-ID 0602, it looks like this: 47 11 06 02 01 00 00 00. The Auto-CA-ID is taken out of the CoCostring, so that the normal CA-ID for the non-autoupdate Provider is no longer used.
Example:
CA-ID = 47 11 06 02 01 00 00 00
The "Auto" Provider is used for 06 02 with the Data filled in the common aeria. Die normal place for the 0602 Keys is not used in this case.
IRSETO9a for the HUMAX 5400 internal CAM and the HumFree Patch 2.4 and up.
10 SECA Providers + 1 Irdeto autoupdate + 4 normal Irdeto Providers
IRDETO/BetaCrypt
supported commands:
01 01 .. .. - Keyupdate
01 01 .. .. - ChannelID Update and Kill
01 05 .. .. - ...
01 02 00 .. .. - Cards Serial Number in ASCII)
01 02 01 .. .. - Cards Serial Number in HEX)
01 02 02 .. .. - Get Cards Country Code)
01 02 03 .. .. - Get Provider ID XX)
01 02 08 .. .. - Readout Receiver Buffer
01 02 09 .. .. - CAM Key xx = which key to use
01 02 0A .. .. - PIN Abfrage der D-Box - Danke an Dr. Mabuse!
01 02 0E .. .. - Read Card File X
01 02 11 .. .. - Answers with 40 Bytes
full autoupdate of the following items:
10 09 -> singlekey update, up to 4 nanos in one ECM string = max 4 Keys at once
10 52 -> doublekey update, up to 2 nanos in one ECM string = max 4 Keys at once
10 E4 -> quadruple update = max 4 Keys at once
11 06|
51 06|
91 06 -> channel ID update and kill - only tested on german PW
all above nanos are anded with 0x3F. So all other variants of these command are also handled.
68 0D|
28 0D -> PMK update includig a new provider ID
CB 20 -> complete CB20 Matrix calculation
SECA
only the CWs are decoded. Autoupdate is impossible in the internal IRDETO CAM.
--------------
This Soft is intended for the 16F628 PIC with a 24C64 EEPROM!!
The 16F628 and 24C64 are pincompatable with the older 16F84 and 24C16 parts. So it is very easy to upgrade your existing DIL or SMD cards...
Alfredo
August 2001
Remember, in version 2.4 of the HumFree Patch, a autoupdate is only possible for the CA-ID which is following the 4711 in the CoCo string. If you wish to have a autoupdate for CA-ID 1702, then the CoCo string should have this format: 47 11 17 02 01 00 00 00. For a autoupdate with CA-ID 0602, it looks like this: 47 11 06 02 01 00 00 00. The Auto-CA-ID is taken out of the CoCostring, so that the normal CA-ID for the non-autoupdate Provider is no longer used.
Example:
CA-ID = 47 11 06 02 01 00 00 00
The "Auto" Provider is used for 06 02 with the Data filled in the common aeria. Die normal place for the 0602 Keys is not used in this case.